ITV SPIKA MS700W1F Commercial Ice Machine Head - 676 lb/Day Full Dice Cube, 22 inches Water-Cooled Modular
Price Match Guarantee
-
Estimated Delivery: 7-10 Business Days
ITV SPIKA MS700W1F Commercial Ice Machine Head - 676 lb/Day Full Dice Cube, 22 inches Water-Cooled Modular
ITV SPIKA MS700W1F Commercial Ice Machine Head - 676 lb/Day Full Dice Cube, 22 inches Water-Cooled Modular Description
The MS700-22 platform is built for high output in a space-saving 22"-wide cabinet. At up to 676 lb (307 kg) per day, the MS700W1F packs serious capacity into a footprint narrower than the 30" SPIKA MS500 — useful where floor space is tight but ice demand is high. The cabinet is taller and deeper to fit the larger system into the narrow footprint.
This version is water-cooled: instead of blowing condenser heat into the room, it transfers heat to a water loop. That keeps the machine running cooler and quieter and protects output in hot kitchens or spaces with limited airflow, where an air-cooled machine would struggle. The trade-off is water use — the condenser consumes about 71.31 gal per 100 lb of ice, much more than the air-cooled version — so it's best where ambient heat or ventilation is the limiting factor and that water cost is acceptable. Water-cooled SPIKA units are often supplied as a special order.
Full-dice cubes measure about 1" × 0.9" × 1" (26 × 23 × 26 mm) — a substantial, traditional cube that melts slowly and dilutes drinks less, making it the go-to choice for spirits, cocktails, and upscale fountain and bar service. The machine forms about 240 of these cubes per cycle on a high-efficiency vertical plate evaporator, using ITV's patented smart water distributor for clean, consistent cubes.
The head pairs with a range of ITV storage bins and can be stacked two-high on the larger SCD-series bins. A smart electronic control board manages every parameter and shows self-diagnostics; panels come off with a single screwdriver for fast service, and the high-resistance AISI 304 stainless steel frame is built for demanding kitchens. It runs on 115 V single-phase power.
Key Features
- Water-cooled: runs cooler and quieter and holds output in hot or poorly ventilated rooms
- Classic full-dice cube: ~1" × 0.9" × 1" (26 × 23 × 26 mm) — slow-melting, low-dilution "Classic American" cube
- High output from a 22" footprint: up to 676 lb (307 kg) per day
- Approx. 240 cubes per cycle
- Lower power draw than the air-cooled model (1,070 W vs 1,350 W at 109°F)
- Stackable two-high on larger SCD-series bins
- 115 V / 60 Hz / single-phase power
- Patented smart water distributor for clean, consistent cubes and better scale resistance
- High-efficiency vertical plate evaporator
- Smart electronic control board with self-diagnostics
- Tool-light service: panels remove with a single screwdriver (EASI — Easy Access for Service & Installation)
- High-resistance AISI 304 stainless steel frame (STIF — Strong Inox Frame)
- Ice scoop included
- NSF and ETL (Intertek) certified
Best For
- Hot kitchens or rooms with limited ventilation where air-cooled output would suffer
- Bars, lounges, and restaurants serving spirits and cocktails where slow-melting, low-dilution cubes matter
- Sites where lower noise and heat output in the room are priorities and water cost is acceptable
- Operations that may scale up later by stacking a second head on a larger bin
Full Specifications
| Specification | Detail |
|---|---|
| Ice Type | Full-dice cube, ~1" × 0.9" × 1" (26 × 23 × 26 mm) |
| Machine Type | Modular ice machine head (requires separate storage bin); stackable 2-high on larger bins |
| Condenser / Cooling | Water-cooled |
| Ice Production (nominal) | 676 lb (307 kg) / 24 h |
| Ice Production (ASHRAE) | ~527 lb (239 kg) / 24 h |
| Production Range (across conditions) | ~378–707 lb (171–321 kg) / 24 h |
| Cubes per Cycle | ~240 |
| Refrigerant | R404A |
| Electrical | 115 V / 60 Hz / 1-phase (±10%) |
| Power Consumption (at 109°F) | 1,070 W |
| ASHRAE Cooling Capacity | 13,853 BTU/h (4,060 W) |
| Heat Rejected | 9,076 BTU/h (2,660 W) |
| Energy Use | 8.4 kWh / 100 lb of ice |
| Water Consumption (total, incl. condenser) | 71.31 gal / 100 lb of ice (78.6 L/h) |
| Wiring / Fuse | 14 AWG (2.5 mm²), 3-conductor / 25 A fuse |
| Operating Pressure | 14.5–87 psi (1–6 bar) |
| Ambient Temp. Range | 41–109°F (5–43°C) |
| Water Temp. Range | 41–95°F (5–35°C) |
| Cabinet Dimensions (W × D × H) | 22" × 24.45" × 25.95" (559 × 621 × 659 mm) |
| Shipping Dimensions (W × D × H) | 25.6" × 27.96" × 32.29" (650 × 710 × 820 mm) |
| Net Weight | 155 lb (70 kg) |
| Shipping Weight | 181 lb (82 kg) |
| Certifications | NSF, ETL (Intertek) |
Warranty
- Ice machine: 3 years parts and labor
- Evaporator: 5 years parts and labor
- Compressor: 5 years parts
Accessories
Included: ice scoop
Optional (not included):
- CS102 — double 10" anti-limescale + anti-chlorine water filter
- CS10 — 10" replacement cartridge (anti-limescale + anti-chlorine)
- Adapter plates — for mounting on various storage bins
- Scale Kleen — descaling/cleaning solution
Recommended storage bins: S400 and SCS350 (recommended); also pairs with S500, S750, S900, S1050, SCS700, SCD900, SCD1350, and SCD1800 (larger SCD bins support two stacked heads).
💡The SPIKA MS700W1F is a head-only unit and needs a separate storage bin to operate. Have good ventilation and want to avoid condenser water cost? See the air-cooled SPIKA MS700A1F. Need smaller, faster-chilling cubes for high-volume fountain service? See the half-dice SPIKA MS700W1H.
ITV SPIKA MS700W1F Commercial Ice Machine Head - 676 lb/Day Full Dice Cube, 22 inches Water-Cooled Modular Features
Premium Quality
Built to Last
Full Cube Ice
Slow Melting
High Output
Up to 676 lb/day
Water-Cooled
Stable Heat Rejection
Modular Design
Choose Your Bin
Stainless Frame
AISI 304 Build
Easy Service
Removable Panels
Commercial Listed
NSF ETL Certified
ITV SPIKA MS700W1F Commercial Ice Machine Head - 676 lb/Day Full Dice Cube, 22 inches Water-Cooled Modular Resources
Shipping Policy
At Ice Maker Supply, we work to make shipping clear, reliable, and easy to track. Most orders are shipped through trusted warehouse, supplier, or carrier partners. Shipping times may vary based on product availability, warehouse location, delivery address, carrier schedule, freight requirements, and order volume.
Standard Delivery
Our estimated delivery time is 4-6 business days for most eligible areas after the order has been processed and shipped.
Some larger ice machines may require freight delivery. Freight shipments may take longer depending on location, carrier availability, and delivery appointment scheduling.
Delivery times are estimates and are not guaranteed.
Order Processing
Orders are usually processed during regular business days, Monday through Friday.
Processing may take longer during:
- Holidays
- High order volume
- Supplier delays
- Payment review
- Address verification
- Product backorders
- Freight scheduling
If there is a delay with your order, we will do our best to keep you updated.
Shipping Confirmation and Tracking
Once your order ships, you will receive a shipping confirmation email with your order and tracking details.
You may be able to see:
- Order status
- Carrier name
- Tracking number
- Estimated delivery date
- Shipment updates
Tracking may not update immediately after the label is created. In some cases, the package may already be moving even if the tracking page has not refreshed.
If your tracking has not updated for more than 5 business days, please contact us so we can help check the shipment status.
Multiple Shipments
Some orders may ship in multiple packages, especially if your order includes:
- Bundled products
- Accessories
- Replacement parts
- Items from different warehouses
- Products from different suppliers
If your order ships separately, you may receive more than one tracking number.
Shipping Areas
Orders placed on icemakersupply.com are currently shipped only within the contiguous United States.
At this time, we do not ship to:
- Alaska
- Hawaii
- Puerto Rico
- U.S. Virgin Islands
- Guam
- American Samoa
- Northern Mariana Islands
- Marshall Islands
- Palau
- Armed Forces Americas
- Armed Forces Europe
- Armed Forces Pacific
- International addresses
If your address is outside our available shipping area, your order may be canceled and refunded.
Expedited Shipping
Expedited shipping is not available at this time.
Because many ice makers are large, heavy, or shipped through supplier warehouses, faster shipping options may not be available for every product.
Freight Delivery
Some commercial or larger ice machines may ship by freight carrier instead of standard parcel delivery.
Freight delivery may require:
- A delivery appointment
- A valid phone number
- Someone available to receive the shipment
- Inspection before signing
- Extra time for scheduling
Please inspect freight shipments carefully before accepting delivery. If the item or packaging appears damaged, note the damage with the carrier and contact us as soon as possible.
If possible, take clear photos of the packaging and product before moving or installing the item.
Damaged Packages
If your order arrives damaged, please contact us immediately.
Send us:
- Your order number
- Photos of the damaged packaging
- Photos of the damaged product
- A short description of the issue
- Delivery receipt notes, if available
Damage claims are easier to process when reported quickly. Late damage reports may limit our ability to file a carrier or supplier claim.
Do not install or use a damaged product before contacting us.
Incorrect or Incomplete Address
Please make sure your shipping address is complete and accurate before placing your order.
Ice Maker Supply is not responsible for delays, failed deliveries, or extra charges caused by:
- Incorrect address
- Missing apartment, suite, or unit number
- Wrong ZIP code
- Unreachable phone number
- Delivery restrictions at the location
If an order is returned because of an incorrect or incomplete address, additional shipping charges may apply before the item can be reshipped.
Can I Change My Delivery Address?
If your order has not shipped yet, contact us as soon as possible. We may be able to update the shipping address before fulfillment begins.
Once an order has shipped or is in transit, we usually cannot change the delivery address.
For freight shipments, address changes may not be possible after carrier pickup.
Returned to Sender
A package may be returned to the sender due to:
- Incorrect address
- Incomplete address
- Failed delivery attempts
- Refused delivery
- Carrier access issues
- Unclaimed shipment
If your package is returned to the sender, contact us with your order number and correct shipping address.
We will review the situation and help arrange the next step. Reshipping fees may apply.
Pre-Order or Backordered Items
If a product is listed as pre-ordered or backordered, the product page may show the estimated shipping date.
Pre-order and backorder shipping dates are estimates and may change due to supplier production, warehouse availability, or carrier delays.
If the estimated shipping date changes, we will do our best to keep you informed.
Warranty Replacement Shipping
If a warranty replacement is approved, shipping may depend on the manufacturer, supplier, or warranty provider.
Replacement orders may require:
- Proof of purchase
- Photos or videos of the issue
- Troubleshooting steps
- Return of the original item
- Supplier or manufacturer approval
A replacement will be shipped only after the required review process is complete.
Lost or Stalled Shipments
If your tracking shows no movement for more than 5 business days, contact us.
We may contact the carrier, warehouse, or supplier to check the shipment status.
If a package is confirmed lost, we will review available options based on the carrier investigation and supplier rules.
Contact Us
Need help with shipping or tracking?
Contact Ice Maker Supply:
- Email: support@icemakersupply.com
- Website: icemakersupply.com
Our support team can help with order status, tracking questions, delivery issues, and shipping concerns.
ITV SPIKA MS700W1F Commercial Ice Machine Head - 676 lb/Day Full Dice Cube, 22 inches Water-Cooled Modular Description
The MS700-22 platform is built for high output in a space-saving 22"-wide cabinet. At up to 676 lb (307 kg) per day, the MS700W1F packs serious capacity into a footprint narrower than the 30" SPIKA MS500 — useful where floor space is tight but ice demand is high. The cabinet is taller and deeper to fit the larger system into the narrow footprint.
This version is water-cooled: instead of blowing condenser heat into the room, it transfers heat to a water loop. That keeps the machine running cooler and quieter and protects output in hot kitchens or spaces with limited airflow, where an air-cooled machine would struggle. The trade-off is water use — the condenser consumes about 71.31 gal per 100 lb of ice, much more than the air-cooled version — so it's best where ambient heat or ventilation is the limiting factor and that water cost is acceptable. Water-cooled SPIKA units are often supplied as a special order.
Full-dice cubes measure about 1" × 0.9" × 1" (26 × 23 × 26 mm) — a substantial, traditional cube that melts slowly and dilutes drinks less, making it the go-to choice for spirits, cocktails, and upscale fountain and bar service. The machine forms about 240 of these cubes per cycle on a high-efficiency vertical plate evaporator, using ITV's patented smart water distributor for clean, consistent cubes.
The head pairs with a range of ITV storage bins and can be stacked two-high on the larger SCD-series bins. A smart electronic control board manages every parameter and shows self-diagnostics; panels come off with a single screwdriver for fast service, and the high-resistance AISI 304 stainless steel frame is built for demanding kitchens. It runs on 115 V single-phase power.
Key Features
- Water-cooled: runs cooler and quieter and holds output in hot or poorly ventilated rooms
- Classic full-dice cube: ~1" × 0.9" × 1" (26 × 23 × 26 mm) — slow-melting, low-dilution "Classic American" cube
- High output from a 22" footprint: up to 676 lb (307 kg) per day
- Approx. 240 cubes per cycle
- Lower power draw than the air-cooled model (1,070 W vs 1,350 W at 109°F)
- Stackable two-high on larger SCD-series bins
- 115 V / 60 Hz / single-phase power
- Patented smart water distributor for clean, consistent cubes and better scale resistance
- High-efficiency vertical plate evaporator
- Smart electronic control board with self-diagnostics
- Tool-light service: panels remove with a single screwdriver (EASI — Easy Access for Service & Installation)
- High-resistance AISI 304 stainless steel frame (STIF — Strong Inox Frame)
- Ice scoop included
- NSF and ETL (Intertek) certified
Best For
- Hot kitchens or rooms with limited ventilation where air-cooled output would suffer
- Bars, lounges, and restaurants serving spirits and cocktails where slow-melting, low-dilution cubes matter
- Sites where lower noise and heat output in the room are priorities and water cost is acceptable
- Operations that may scale up later by stacking a second head on a larger bin
Full Specifications
| Specification | Detail |
|---|---|
| Ice Type | Full-dice cube, ~1" × 0.9" × 1" (26 × 23 × 26 mm) |
| Machine Type | Modular ice machine head (requires separate storage bin); stackable 2-high on larger bins |
| Condenser / Cooling | Water-cooled |
| Ice Production (nominal) | 676 lb (307 kg) / 24 h |
| Ice Production (ASHRAE) | ~527 lb (239 kg) / 24 h |
| Production Range (across conditions) | ~378–707 lb (171–321 kg) / 24 h |
| Cubes per Cycle | ~240 |
| Refrigerant | R404A |
| Electrical | 115 V / 60 Hz / 1-phase (±10%) |
| Power Consumption (at 109°F) | 1,070 W |
| ASHRAE Cooling Capacity | 13,853 BTU/h (4,060 W) |
| Heat Rejected | 9,076 BTU/h (2,660 W) |
| Energy Use | 8.4 kWh / 100 lb of ice |
| Water Consumption (total, incl. condenser) | 71.31 gal / 100 lb of ice (78.6 L/h) |
| Wiring / Fuse | 14 AWG (2.5 mm²), 3-conductor / 25 A fuse |
| Operating Pressure | 14.5–87 psi (1–6 bar) |
| Ambient Temp. Range | 41–109°F (5–43°C) |
| Water Temp. Range | 41–95°F (5–35°C) |
| Cabinet Dimensions (W × D × H) | 22" × 24.45" × 25.95" (559 × 621 × 659 mm) |
| Shipping Dimensions (W × D × H) | 25.6" × 27.96" × 32.29" (650 × 710 × 820 mm) |
| Net Weight | 155 lb (70 kg) |
| Shipping Weight | 181 lb (82 kg) |
| Certifications | NSF, ETL (Intertek) |
Warranty
- Ice machine: 3 years parts and labor
- Evaporator: 5 years parts and labor
- Compressor: 5 years parts
Accessories
Included: ice scoop
Optional (not included):
- CS102 — double 10" anti-limescale + anti-chlorine water filter
- CS10 — 10" replacement cartridge (anti-limescale + anti-chlorine)
- Adapter plates — for mounting on various storage bins
- Scale Kleen — descaling/cleaning solution
Recommended storage bins: S400 and SCS350 (recommended); also pairs with S500, S750, S900, S1050, SCS700, SCD900, SCD1350, and SCD1800 (larger SCD bins support two stacked heads).
💡The SPIKA MS700W1F is a head-only unit and needs a separate storage bin to operate. Have good ventilation and want to avoid condenser water cost? See the air-cooled SPIKA MS700A1F. Need smaller, faster-chilling cubes for high-volume fountain service? See the half-dice SPIKA MS700W1H.
ITV SPIKA MS700W1F Commercial Ice Machine Head - 676 lb/Day Full Dice Cube, 22 inches Water-Cooled Modular Features
Premium Quality
Built to Last
Full Cube Ice
Slow Melting
High Output
Up to 676 lb/day
Water-Cooled
Stable Heat Rejection
Modular Design
Choose Your Bin
Stainless Frame
AISI 304 Build
Easy Service
Removable Panels
Commercial Listed
NSF ETL Certified
ITV SPIKA MS700W1F Commercial Ice Machine Head - 676 lb/Day Full Dice Cube, 22 inches Water-Cooled Modular Resources
Shipping Policy
At Ice Maker Supply, we work to make shipping clear, reliable, and easy to track. Most orders are shipped through trusted warehouse, supplier, or carrier partners. Shipping times may vary based on product availability, warehouse location, delivery address, carrier schedule, freight requirements, and order volume.
Standard Delivery
Our estimated delivery time is 4-6 business days for most eligible areas after the order has been processed and shipped.
Some larger ice machines may require freight delivery. Freight shipments may take longer depending on location, carrier availability, and delivery appointment scheduling.
Delivery times are estimates and are not guaranteed.
Order Processing
Orders are usually processed during regular business days, Monday through Friday.
Processing may take longer during:
- Holidays
- High order volume
- Supplier delays
- Payment review
- Address verification
- Product backorders
- Freight scheduling
If there is a delay with your order, we will do our best to keep you updated.
Shipping Confirmation and Tracking
Once your order ships, you will receive a shipping confirmation email with your order and tracking details.
You may be able to see:
- Order status
- Carrier name
- Tracking number
- Estimated delivery date
- Shipment updates
Tracking may not update immediately after the label is created. In some cases, the package may already be moving even if the tracking page has not refreshed.
If your tracking has not updated for more than 5 business days, please contact us so we can help check the shipment status.
Multiple Shipments
Some orders may ship in multiple packages, especially if your order includes:
- Bundled products
- Accessories
- Replacement parts
- Items from different warehouses
- Products from different suppliers
If your order ships separately, you may receive more than one tracking number.
Shipping Areas
Orders placed on icemakersupply.com are currently shipped only within the contiguous United States.
At this time, we do not ship to:
- Alaska
- Hawaii
- Puerto Rico
- U.S. Virgin Islands
- Guam
- American Samoa
- Northern Mariana Islands
- Marshall Islands
- Palau
- Armed Forces Americas
- Armed Forces Europe
- Armed Forces Pacific
- International addresses
If your address is outside our available shipping area, your order may be canceled and refunded.
Expedited Shipping
Expedited shipping is not available at this time.
Because many ice makers are large, heavy, or shipped through supplier warehouses, faster shipping options may not be available for every product.
Freight Delivery
Some commercial or larger ice machines may ship by freight carrier instead of standard parcel delivery.
Freight delivery may require:
- A delivery appointment
- A valid phone number
- Someone available to receive the shipment
- Inspection before signing
- Extra time for scheduling
Please inspect freight shipments carefully before accepting delivery. If the item or packaging appears damaged, note the damage with the carrier and contact us as soon as possible.
If possible, take clear photos of the packaging and product before moving or installing the item.
Damaged Packages
If your order arrives damaged, please contact us immediately.
Send us:
- Your order number
- Photos of the damaged packaging
- Photos of the damaged product
- A short description of the issue
- Delivery receipt notes, if available
Damage claims are easier to process when reported quickly. Late damage reports may limit our ability to file a carrier or supplier claim.
Do not install or use a damaged product before contacting us.
Incorrect or Incomplete Address
Please make sure your shipping address is complete and accurate before placing your order.
Ice Maker Supply is not responsible for delays, failed deliveries, or extra charges caused by:
- Incorrect address
- Missing apartment, suite, or unit number
- Wrong ZIP code
- Unreachable phone number
- Delivery restrictions at the location
If an order is returned because of an incorrect or incomplete address, additional shipping charges may apply before the item can be reshipped.
Can I Change My Delivery Address?
If your order has not shipped yet, contact us as soon as possible. We may be able to update the shipping address before fulfillment begins.
Once an order has shipped or is in transit, we usually cannot change the delivery address.
For freight shipments, address changes may not be possible after carrier pickup.
Returned to Sender
A package may be returned to the sender due to:
- Incorrect address
- Incomplete address
- Failed delivery attempts
- Refused delivery
- Carrier access issues
- Unclaimed shipment
If your package is returned to the sender, contact us with your order number and correct shipping address.
We will review the situation and help arrange the next step. Reshipping fees may apply.
Pre-Order or Backordered Items
If a product is listed as pre-ordered or backordered, the product page may show the estimated shipping date.
Pre-order and backorder shipping dates are estimates and may change due to supplier production, warehouse availability, or carrier delays.
If the estimated shipping date changes, we will do our best to keep you informed.
Warranty Replacement Shipping
If a warranty replacement is approved, shipping may depend on the manufacturer, supplier, or warranty provider.
Replacement orders may require:
- Proof of purchase
- Photos or videos of the issue
- Troubleshooting steps
- Return of the original item
- Supplier or manufacturer approval
A replacement will be shipped only after the required review process is complete.
Lost or Stalled Shipments
If your tracking shows no movement for more than 5 business days, contact us.
We may contact the carrier, warehouse, or supplier to check the shipment status.
If a package is confirmed lost, we will review available options based on the carrier investigation and supplier rules.
Contact Us
Need help with shipping or tracking?
Contact Ice Maker Supply:
- Email: support@icemakersupply.com
- Website: icemakersupply.com
Our support team can help with order status, tracking questions, delivery issues, and shipping concerns.
needed higher production without changing our whole setup. paired this with a bigger bin and its been keeping up great
had this running through some long shifts lately
no complaints so far and the ice comes out really consistent
we switched to full cubes for our drink service and im glad we did. they stay firm much longer in the glass
Been running it daily for a while now. It’s dependable, keeps producing through long shifts, and honestly we don’t think about it much—which is exactly what I want from an ice machine.
Good output and easy for the staff to deal with. happy with it so far
Our old unit had us worrying about ice on busy nights. Since switching to this one, that really hasn’t been a problem.
Solid machine. does the job every day without much fuss
We run this pretty hard during dinner service and it keeps up nicely. Ice has been consistent and we haven’t had any real issues.
honestly the cube quality is my favorite part. clean solid ice and a good size for the cocktails we serve
water cooled was the better choice for our space. the room already gets warm and this setup has worked out nicely
