ICETRO IPK-62B Beckett Drain Pump Kit
Price Match Guarantee
Accessory Compatibility Notice!
This accessory is available with compatible commercial ice machines only. Contact our team to confirm compatibility and find the right solution for your equipment.
-
Estimated Delivery: 7-10 Business Days
ICETRO IPK-62B Beckett Drain Pump Kit Description
Drain an Undercounter ICETRO Where Gravity Drainage Is Not Available
The ICETRO IPK-62B is an internal Beckett drain-pump kit for compatible ICETRO undercounter ice machines installed where a nearby gravity floor drain is unavailable. It collects bin and ice-maker drain water inside the cabinet and automatically pumps it to an approved drain connection.
ICETRO lists the kit for the IU-0070-OU gourmet-cube family and the IU-0090-AN / IU-0094-AN nugget families, including the refrigerant and ADA/non-ADA variants identified in the current manual. The kit includes model-specific brackets, hoses, clamps, fittings, and wiring parts because the routing differs by machine version.
The pump's safety circuit is part of the ice-machine connection. If the pump water level reaches its limit, the ice machine stops while the pump continues to operate; normal ice-machine operation resumes after the water level falls.
Key Features
-
Beckett pump selected for quiet undercounter operation
-
Fits in the lower rear section of the compatible machine
-
Kit includes the mounting and connection components listed for each supported model
-
Automatic pump operation with ice-machine safety interlock
-
120V / 60Hz / 1A AC
Full Specifications
|
Model |
IPK-62B |
|
Compatible Families |
IU-0070-OU; IU-0090-AN; IU-0094-AN variants listed in the manual |
|
Electrical |
120V / 60Hz / 1A AC |
|
Discharge Hose |
Approximately 9.8 ft supplied |
|
Maximum Drain Route |
20 ft horizontal and 8 ft vertical |
|
Vent Requirement |
Vent tube must be installed, open, and free of kinks |
|
Primary Equipment Included |
No - drain-pump kit only |
Installation & Ordering Notes
Installation requires opening the ice-machine cabinet, changing drain routing, connecting the pump harness, and completing a leak and safety-switch test. Keep a 2-inch air gap between the discharge tube and the receiving drain, do not exceed the published route limits, and never omit or kink the vent tube. A qualified installer should follow the exact manual section for the machine's refrigerant and ADA configuration.
ICETRO IPK-62B Beckett Drain Pump Kit Features
ICETRO IPK-62B Beckett Drain Pump Kit Resources
Shipping Policy
At Ice Maker Supply, we work to make shipping clear, reliable, and easy to track. Most orders are shipped through trusted warehouse, supplier, or carrier partners. Shipping times may vary based on product availability, warehouse location, delivery address, carrier schedule, freight requirements, and order volume.
Standard Delivery
Our estimated delivery time is 7-10 business days for most eligible areas after the order has been processed and shipped.
Some larger ice machines may require freight delivery. Freight shipments may take longer depending on location, carrier availability, and delivery appointment scheduling.
Delivery times are estimates and are not guaranteed.
Order Processing
Orders are usually processed during regular business days, Monday through Friday.
Processing may take longer during:
- Holidays
- High order volume
- Supplier delays
- Payment review
- Address verification
- Product backorders
- Freight scheduling
If there is a delay with your order, we will do our best to keep you updated.
Shipping Confirmation and Tracking
Once your order ships, you will receive a shipping confirmation email with your order and tracking details.
You may be able to see:
- Order status
- Carrier name
- Tracking number
- Estimated delivery date
- Shipment updates
Tracking may not update immediately after the label is created. In some cases, the package may already be moving even if the tracking page has not refreshed.
If your tracking has not updated for more than 5 business days, please contact us so we can help check the shipment status.
Multiple Shipments
Some orders may ship in multiple packages, especially if your order includes:
- Bundled products
- Accessories
- Replacement parts
- Items from different warehouses
- Products from different suppliers
If your order ships separately, you may receive more than one tracking number.
Shipping Areas
Orders placed on icemakersupply.com are currently shipped only within the contiguous United States.
At this time, we do not ship to:
- Alaska
- Hawaii
- Puerto Rico
- U.S. Virgin Islands
- Guam
- American Samoa
- Northern Mariana Islands
- Marshall Islands
- Palau
- Armed Forces Americas
- Armed Forces Europe
- Armed Forces Pacific
- International addresses
If your address is outside our available shipping area, your order may be canceled and refunded.
Expedited Shipping
Expedited shipping is not available at this time.
Because many ice makers are large, heavy, or shipped through supplier warehouses, faster shipping options may not be available for every product.
Freight Delivery
Some commercial or larger ice machines may ship by freight carrier instead of standard parcel delivery.
Freight delivery may require:
- A delivery appointment
- A valid phone number
- Someone available to receive the shipment
- Inspection before signing
- Extra time for scheduling
Please inspect freight shipments carefully before accepting delivery. If the item or packaging appears damaged, note the damage with the carrier and contact us as soon as possible.
If possible, take clear photos of the packaging and product before moving or installing the item.
Damaged Packages
If your order arrives damaged, please contact us immediately.
Send us:
- Your order number
- Photos of the damaged packaging
- Photos of the damaged product
- A short description of the issue
- Delivery receipt notes, if available
Damage claims are easier to process when reported quickly. Late damage reports may limit our ability to file a carrier or supplier claim.
Do not install or use a damaged product before contacting us.
Incorrect or Incomplete Address
Please make sure your shipping address is complete and accurate before placing your order.
Ice Maker Supply is not responsible for delays, failed deliveries, or extra charges caused by:
- Incorrect address
- Missing apartment, suite, or unit number
- Wrong ZIP code
- Unreachable phone number
- Delivery restrictions at the location
If an order is returned because of an incorrect or incomplete address, additional shipping charges may apply before the item can be reshipped.
Can I Change My Delivery Address?
If your order has not shipped yet, contact us as soon as possible. We may be able to update the shipping address before fulfillment begins.
Once an order has shipped or is in transit, we usually cannot change the delivery address.
For freight shipments, address changes may not be possible after carrier pickup.
Returned to Sender
A package may be returned to the sender due to:
- Incorrect address
- Incomplete address
- Failed delivery attempts
- Refused delivery
- Carrier access issues
- Unclaimed shipment
If your package is returned to the sender, contact us with your order number and correct shipping address.
We will review the situation and help arrange the next step. Reshipping fees may apply.
Pre-Order or Backordered Items
If a product is listed as pre-ordered or backordered, the product page may show the estimated shipping date.
Pre-order and backorder shipping dates are estimates and may change due to supplier production, warehouse availability, or carrier delays.
If the estimated shipping date changes, we will do our best to keep you informed.
Warranty Replacement Shipping
If a warranty replacement is approved, shipping may depend on the manufacturer, supplier, or warranty provider.
Replacement orders may require:
- Proof of purchase
- Photos or videos of the issue
- Troubleshooting steps
- Return of the original item
- Supplier or manufacturer approval
A replacement will be shipped only after the required review process is complete.
Lost or Stalled Shipments
If your tracking shows no movement for more than 5 business days, contact us.
We may contact the carrier, warehouse, or supplier to check the shipment status.
If a package is confirmed lost, we will review available options based on the carrier investigation and supplier rules.
Contact Us
Need help with shipping or tracking?
Contact Ice Maker Supply:
- Email: support@icemakersupply.com
- Website: icemakersupply.com
Our support team can help with order status, tracking questions, delivery issues, and shipping concerns.
ICETRO IPK-62B Beckett Drain Pump Kit Description
Drain an Undercounter ICETRO Where Gravity Drainage Is Not Available
The ICETRO IPK-62B is an internal Beckett drain-pump kit for compatible ICETRO undercounter ice machines installed where a nearby gravity floor drain is unavailable. It collects bin and ice-maker drain water inside the cabinet and automatically pumps it to an approved drain connection.
ICETRO lists the kit for the IU-0070-OU gourmet-cube family and the IU-0090-AN / IU-0094-AN nugget families, including the refrigerant and ADA/non-ADA variants identified in the current manual. The kit includes model-specific brackets, hoses, clamps, fittings, and wiring parts because the routing differs by machine version.
The pump's safety circuit is part of the ice-machine connection. If the pump water level reaches its limit, the ice machine stops while the pump continues to operate; normal ice-machine operation resumes after the water level falls.
Key Features
-
Beckett pump selected for quiet undercounter operation
-
Fits in the lower rear section of the compatible machine
-
Kit includes the mounting and connection components listed for each supported model
-
Automatic pump operation with ice-machine safety interlock
-
120V / 60Hz / 1A AC
Full Specifications
|
Model |
IPK-62B |
|
Compatible Families |
IU-0070-OU; IU-0090-AN; IU-0094-AN variants listed in the manual |
|
Electrical |
120V / 60Hz / 1A AC |
|
Discharge Hose |
Approximately 9.8 ft supplied |
|
Maximum Drain Route |
20 ft horizontal and 8 ft vertical |
|
Vent Requirement |
Vent tube must be installed, open, and free of kinks |
|
Primary Equipment Included |
No - drain-pump kit only |
Installation & Ordering Notes
Installation requires opening the ice-machine cabinet, changing drain routing, connecting the pump harness, and completing a leak and safety-switch test. Keep a 2-inch air gap between the discharge tube and the receiving drain, do not exceed the published route limits, and never omit or kink the vent tube. A qualified installer should follow the exact manual section for the machine's refrigerant and ADA configuration.
ICETRO IPK-62B Beckett Drain Pump Kit Features
ICETRO IPK-62B Beckett Drain Pump Kit Resources
Shipping Policy
At Ice Maker Supply, we work to make shipping clear, reliable, and easy to track. Most orders are shipped through trusted warehouse, supplier, or carrier partners. Shipping times may vary based on product availability, warehouse location, delivery address, carrier schedule, freight requirements, and order volume.
Standard Delivery
Our estimated delivery time is 7-10 business days for most eligible areas after the order has been processed and shipped.
Some larger ice machines may require freight delivery. Freight shipments may take longer depending on location, carrier availability, and delivery appointment scheduling.
Delivery times are estimates and are not guaranteed.
Order Processing
Orders are usually processed during regular business days, Monday through Friday.
Processing may take longer during:
- Holidays
- High order volume
- Supplier delays
- Payment review
- Address verification
- Product backorders
- Freight scheduling
If there is a delay with your order, we will do our best to keep you updated.
Shipping Confirmation and Tracking
Once your order ships, you will receive a shipping confirmation email with your order and tracking details.
You may be able to see:
- Order status
- Carrier name
- Tracking number
- Estimated delivery date
- Shipment updates
Tracking may not update immediately after the label is created. In some cases, the package may already be moving even if the tracking page has not refreshed.
If your tracking has not updated for more than 5 business days, please contact us so we can help check the shipment status.
Multiple Shipments
Some orders may ship in multiple packages, especially if your order includes:
- Bundled products
- Accessories
- Replacement parts
- Items from different warehouses
- Products from different suppliers
If your order ships separately, you may receive more than one tracking number.
Shipping Areas
Orders placed on icemakersupply.com are currently shipped only within the contiguous United States.
At this time, we do not ship to:
- Alaska
- Hawaii
- Puerto Rico
- U.S. Virgin Islands
- Guam
- American Samoa
- Northern Mariana Islands
- Marshall Islands
- Palau
- Armed Forces Americas
- Armed Forces Europe
- Armed Forces Pacific
- International addresses
If your address is outside our available shipping area, your order may be canceled and refunded.
Expedited Shipping
Expedited shipping is not available at this time.
Because many ice makers are large, heavy, or shipped through supplier warehouses, faster shipping options may not be available for every product.
Freight Delivery
Some commercial or larger ice machines may ship by freight carrier instead of standard parcel delivery.
Freight delivery may require:
- A delivery appointment
- A valid phone number
- Someone available to receive the shipment
- Inspection before signing
- Extra time for scheduling
Please inspect freight shipments carefully before accepting delivery. If the item or packaging appears damaged, note the damage with the carrier and contact us as soon as possible.
If possible, take clear photos of the packaging and product before moving or installing the item.
Damaged Packages
If your order arrives damaged, please contact us immediately.
Send us:
- Your order number
- Photos of the damaged packaging
- Photos of the damaged product
- A short description of the issue
- Delivery receipt notes, if available
Damage claims are easier to process when reported quickly. Late damage reports may limit our ability to file a carrier or supplier claim.
Do not install or use a damaged product before contacting us.
Incorrect or Incomplete Address
Please make sure your shipping address is complete and accurate before placing your order.
Ice Maker Supply is not responsible for delays, failed deliveries, or extra charges caused by:
- Incorrect address
- Missing apartment, suite, or unit number
- Wrong ZIP code
- Unreachable phone number
- Delivery restrictions at the location
If an order is returned because of an incorrect or incomplete address, additional shipping charges may apply before the item can be reshipped.
Can I Change My Delivery Address?
If your order has not shipped yet, contact us as soon as possible. We may be able to update the shipping address before fulfillment begins.
Once an order has shipped or is in transit, we usually cannot change the delivery address.
For freight shipments, address changes may not be possible after carrier pickup.
Returned to Sender
A package may be returned to the sender due to:
- Incorrect address
- Incomplete address
- Failed delivery attempts
- Refused delivery
- Carrier access issues
- Unclaimed shipment
If your package is returned to the sender, contact us with your order number and correct shipping address.
We will review the situation and help arrange the next step. Reshipping fees may apply.
Pre-Order or Backordered Items
If a product is listed as pre-ordered or backordered, the product page may show the estimated shipping date.
Pre-order and backorder shipping dates are estimates and may change due to supplier production, warehouse availability, or carrier delays.
If the estimated shipping date changes, we will do our best to keep you informed.
Warranty Replacement Shipping
If a warranty replacement is approved, shipping may depend on the manufacturer, supplier, or warranty provider.
Replacement orders may require:
- Proof of purchase
- Photos or videos of the issue
- Troubleshooting steps
- Return of the original item
- Supplier or manufacturer approval
A replacement will be shipped only after the required review process is complete.
Lost or Stalled Shipments
If your tracking shows no movement for more than 5 business days, contact us.
We may contact the carrier, warehouse, or supplier to check the shipment status.
If a package is confirmed lost, we will review available options based on the carrier investigation and supplier rules.
Contact Us
Need help with shipping or tracking?
Contact Ice Maker Supply:
- Email: support@icemakersupply.com
- Website: icemakersupply.com
Our support team can help with order status, tracking questions, delivery issues, and shipping concerns.
